Before & After using Vertglas Fiberglass Gelcoat Restoration System - MarineStore.com

How to apply Vertglas: Easy as 1-2-3

Vertglas is easy to apply. Just follow the three steps below and your boat can be shinier that the day it was new!

Step 1:
Vertglas-1-16 Vertglas #1
Oxidation Remover
Vertglas-scrubpad Non-abrasive
scrub pad
Scrub the surface using Vertglas #1 Oxidation Remover to remove all dirt and oxidation, leaving behind a clean surface. The oxidation remover works fast, saving you lots of time.
Step 2:
Vertglas-2-32 Vertglas #2
Boat Wash
Wash off the residue using Vertglas #2 Boat Wash. This is also a great way to keep your boat looking good after you've applied Vertglas.
Step 3:
Vertglas-3-32 Vertglas #3
Sealer
Vertglas-brush-4 Vertglas Sealer
Applicator
After the surface is dry, wipe on coats of Vertglas #3 Sealer to seal the surface and bring out the shine. Each coat dries in less than a minute - no rubbing or buffing required!
Bottomline-1

You're done!

Congratulations! Your shiny boat is protected for the season. Next season, just reapply a few more coats of the sealer and your boat is protected again!

You can do this too! It really is this easy.

Return to the Vertglas page