|
|
 |
Before and After Using Vertglas
This is an obviously neglected boat that we cleaned up using the Vertglas
system. You can see in the Before picture that the red strip on the topsides was
almost white due to oxidation. Now look at the same section in the After
picture. The Vertglas system brought back the color and gave the boat a great
shine. Best of all, this shine will last the entire season!
How we did it
| Step 1: |
 |
+ |
 |
Scrub the surface using Vertglas #1 Oxidation Remover to remove all dirt and oxidation,
leaving behind a clean surface. The oxidation remover works fast, saving you lots of time.
|
|
Vertglas #1
Oxidation Remover |
|
Non-abrasive
scrub pad |
| Step 2: |
 |
|
|
Wash off the residue using Vertglas #2 Boat Wash. This is also a great way to keep your boat looking good after you've applied Vertglas.
|
|
Vertglas #2
Boat Wash |
|
|
| Step 3: |
 |
+ |
 |
After the surface is dry, wipe on coats of Vertglas #3 Sealer to seal the surface and bring out the shine. Each coat dries in less than a minute - no rubbing or buffing required!
|
|
Vertglas #3
Sealer |
|
Vertglas Sealer
Applicator |
Step 4: You're done!
Congratulations! Your shiny boat is protected for the season. Next season, just reapply a few more coats of the sealer and your boat is protected again!
You can do this too! It really is this easy.
Return to the Vertglas page
or see prices & ordering information.
|
